INTU FR WRAP L

Intumescent pipe roll

Product description

INTU FR WRAP L is a fire protection tape made from a graphite-based intumescent material that expands when exposed to high temperatures. In the event of a fire, it swells to form a barrier that prevents the spread of flames and smoke, maintaining the partition’s up to EI 240.

The product is supplied in 60 or 100 mm wide rolls and achieves very high fire protection parameters with a tape thickness of just 2.0 mm. The tape’s flexibility makes it very easy to install on the protected installation. Depending on the diameter of the pipe, insulated pipe, or bundle, select the appropriate number of wraps (in accordance with ETA-18/0593). The tape should be wrapped around the installation and then placed in the opening inside the partition.

Fire resistance class up to EI 240
Easy assembly
Combustible pipe with or without insulation
Metal pipe with insulation
For walls and floors
High degree of swelling
Certification LEED & BREEAM

Documents

Compliance

European Technical Assessment: ETA-18/0593 of 30/09/2025
Declaration of Performance: DoP 11/2019
Certificate of Constancy of Performance: 1488-CPR-0722/W
VOC Emission test report – Indoor Air Comfort GOLD
Certification LEED & BREEAM

Availability

Product	Type	Delivery form	Article number	Delivery group
INTU FR WRAP L	60 mm x 10 m	1 pc	1006010000	A
	60 mm x 10 m (self-adhesive)	1 pc	1006010001	A
	60 mm x 25 m	1 pc	1006025000	A
	60 mm x 25 m (self-adhesive)	1 pc	1006025001	A
	100 mm x 10 m	1 pc	1010010000	A
	100 mm x 10 m (self-adhesive)	1 pc	1010010001	A
	100 mm x 25 mb	1 pc	1010025000	A
	100 mm x 25 m (self-adhesive)	1 pc	1010025001	A

Application

INTU FR WRAP L tape is used for fire protection of plastic, composite, and multilayer composite pipes passing through fire-separating partitions, either individually or in bundles, as well as combustible and non-combustible pipes with insulation.

Flexible walls

The wall should be at least 100 mm thickness (with cladding of at least two plasterboards on both sides).

Rigid walls

The wall should be at least 100 mm thickness (made of concrete or masonry units with a density of not less than 450 kg/m³).

Rigid floor

The floor should be at least 150 mm thickness (made of concrete for example reinforced, cellular, masonry with a density of not less than 550 kg/³).